Products | Vallex

Tel / Fax: +374 10 510818 / 510845

Home

Products

Storage

Dell | EMC
Dell | EMC AX4-5f
Dell | EMC AX4-5i

Dell EqualLogic
EqualLogic PS 6000X
EqualLogic PS 6010XV

Dell PowerVault

Tape Backup Storage
PowerVault ML6000
PowerVault 100/110T
PowerVault 114T
Powervault TL2000 & TL4000 FS
PowerVault 124T

Direct Attached Storage DAS
PowerVault MD1000
PowerVault MD3000
PowerVault RD1000
PowerVault MD3000i
PowerVault MD1120

Network Attached Storage
PowerVault NF100
PowerVault NF500
PowerVault NF600
PowerVault NX1950

For all other Dell please contact us

Dell | EMC AX4-5f

Overview

Tech Specs

Storage Capacity

Up to 27TB of raw storage capacity with SAS drives or 60TB with SATA II drives

Scalability

Support for up to 64 highly available servers attached to a single AX4-5 array in either a Fibre Channel or an iSCSI SAN

Directly connect up to 4 servers via Fibre Channel (AX4-5f) or iSCSI (AX4-5i)

Four front-end 4 Gbps Fibre Channel optical (AX4-5f) or Gigabit Ethernet copper (AX4-5i) ports per array. With the use of PowerPath^® failover and load balancing software for multipath I/O, users can operate all four ports simultaneously

Cache

Up to 2GB of cache (1GB per storage processor)

UPS-backed mirrored cache for the dual storage processor system

Cache-destaging to disk

RAID Levels

RAID 3, 5, 6 and 1/0

Supported Servers

All dual and quad socket Dell PowerEdge^TM servers

Variety of Compaq^® , HP^® , IBM^® and SUN^® servers as validated by EMC

OS support

AX4-5

Microsoft^® Windows Server^® 2000

Windows Server^® 2003

Windows Server^® 2008

Linux^®

Solaris^TM

VMware^®

AIX

HP-UX

Netware (limited support)

Direct Connect Servers

Up to 2 servers with a single Storage Processor

Up to 4 servers with dual Storage Processors

Servers Attached to a single array in a SAN

Up to 64 redundantly connected servers connected to a single array in a SAN

Front End Connectivity

AX4-5f - Two FC4 (Fibre Channel 4Gbps) front-end optical ports per storage processor

AX4-5i - Two iSCSI 1Gb Ethernet RJ45 connectors per storage processor

Drive Interface

Dual ported SAS with one 4X SAS expansion port per controller

Drives Available

146GB 15K RPM SAS drive

300GB 15K RPM SAS drive

400GB 10K RPM SAS drive

450GB 15K RPM SAS drive

750GB 7.2K RPM SATA II drive

1TB 7.2K RPM SATA II drive

Available Software

Integrated management features

Navisphere Express for array-based management
Snapshot management (up to 16 snapshots)
EMC PowerPath on the server for path management and path failover

Optional Advanced Management and Data Replication Software

EMC Navisphere^® Manager: Robust configuration, management and event notification from a single management station
EMC SnapView^TM : Point-in-time view of information for nondisruptive backup
EMC SAN Copy^TM : Migrate or distribute data within the SAN fabric (fibre channel AX4-5 only)
EMC MirrorView^TM : Provides synchronous or asynchronous mirroring of information between two or more arrays (fibre channel AX4-5 only)
EMC Navisphere Analyzer: Provides detailed real-time and historical information about your arrays which can help you to investigate performance patterns and trends before problems occur and can provide a powerful tool for hardware capacity planning, as well as for intelligent load balancing

Dimensions

AX4-5 Disk Processor Enclosure (DPE)

Rack size: 2U

Height: 3.5" (8.89cm)

Width: 17.5" (44.45cm)

Depth: 20" (50.8cm)

Weight: 61lbs (27.7kg) max.

AX4-5 Disk Array Enclosure (DAE)

Rack Size: 2U

Height: 3.5" (8.89cm)

Width: 17.5" (44.45cm)

Depth: 20" (50.8cm)

Weight: 54lbs (24.5kg) max.

Power

AX4-5 Disk Processor Enclosure (DPE)

Frequency: 47-63 Hz

AC Voltage: 100-240 Vac, single phase

Power Factor: 0.98 (min.)

Power Consumption: 490 VA, 450W (max.)

Heat Dissipation: 1535 BTU/hr

Protection: 12 amps, fused

AC Circuits: Redundant, external AC circuits

Inlet Type: Single inlet, IE320-C14 appliance coupler